KK Multiwii Board SE v1.0 new mini FC Board

13 kinds of supported multi rotor type (2.0 Firmware)

Package contents:

 

Descriptions:

 

   Supported multi rotor type (2.0 Firmware)         ·BICOPTER         ·TRICOPTER         ·QUAD +         ·QUAD X         ·QUAD Y4         ·HEX Y6         ·HEX FLAT +         ·HEX FLAT X         ·OCTO X8         ·OCTO FLAT +         ·OCTO FLAT X         ·FLYING WING         ·VTAIL 4 Gimbal and camera trigger output         ·2 servos output for PITCH and ROLL gimbal system         ·a servos output to trigger a camera button                   we can now have the following configurations:                   HEX (FLAT X, FLAT +, or Y6)                   - with a standard receiver: in this case the 2 last motors are on PIN A0/A1 instead of D5&D6                   - or still with a PPM SUM receiver                   - with 2 servos for a GIMBAL mode + 1 servo for CAM TRIG:                   - with a PPM sum receiver: in this case, the 2 last motors are on PIN D5&D6 and the servos are on PIN A0/A1/A2                   - with a standard receiver: in this case, the 2 last motors are on PIN A0/A1 and the servos are on PIN A2/D12 (no CAM trig here) Flight mode         ·One of the following basic mode                   - Acro                   - Level                   - Alt Hold                   - Head Lock         ·Optional mode                   - HeadFree                   - GPS Hold (Need GPS receiver + I2C-GPS NAV Board)                   - GPS Back to home position (Need GPS receiver + I2C-GPS NAV Board) Sensors         ·ITG3205         ·BMA180         ·HMC5883L         ·BMP085 I/O Port         ·6 input channel for standard receiver and PPM SUM receiver,D7 and D8 are AUX1 and AUX2         ·Up to 8 motor/servo output channel         ·One FTDI/serial port for debug, upload firmware or for LCD display         ·One I2C port for extend sensor,I2C LCD/OLED display or CRIUS I2c-GPS NAV board Other         ·Dimension: 40mmX40mm         ·Height: 11.6mm         ·Weight: 9.6g±0.1g         ·Fixing hole spacing: 35mm (It can be changed to 45mm by CRIUS Distribution Board)         ·Hole diameter: 3mm  

 

 What you will received is the same as the picture below:   

 

We guarantee 100% Buyer Satisfaction.Please contact us before leaving 1 or 2 ratings, negative/neutral feedback or open any dispute.We will solve 100% your problems fast and quick. Please contact us when you have any question!

1.all product have been checked and packaged in good condition before dispatch

2.In case the item is defective,please inform us within 7 days of  receipt,we will replace a new one .No Refunds are offered .

3.Buyers have to pay for the return cost and we will pay the cost for resend